ACDataSeeker is a multithreaded text and file finder for the OS/2 Presentation Manager. ACDataSeeker was written by Alessandro Cantatore.

Installation Directory: appsDir || '\ACDataSeeker'
xoomer.virgilio.it

This command modifies Config.Sys for use on an ACP (Aurora convenience pack) aka Warp Server for e-business system. The most important change is to set a TEMP directory. Other changes are made for ease of use, and to remove some unused drivers.

A reboot is needed after this command completes.

Installation Directory: FindBootDrive() || ':\'

Adobe Acrobat Reader for OS/2, version 5.1, is an abandoned beta of the product from Innotek. It works quite well, and can open many of the Acrobat documents that earlier versions cannot handle.

The installation is unattended. The browser plugin is installed into Netscape, Mozilla, SeaMonkey and Firefox.

Installation Directory: appsDir || '\AcrobatReader'
www.innotek.de

This command installs the OS/2 Kit for Acrobat Reader plugin into the Mozilla plugins directory. If the MOZ_PLUGIN_PATH environment variable is set, then the plugin is copied there. Otherwise, the plugin will be installed in Mozilla, Firefox and SeaMonkey. The plugin will be installed in Netscape in any case.

The Acrobat plugin is installed from the OS/2 Kit for Acrobat Reader version 5.1 if available, otherwise from version 4.0.

Installation Directory: strip(SysIni('User', 'OS2 Kit for Acrobat Reader', 'Path'), 'Trailing', d2c(0))
www.innotek.de

This command installs ae, a replacement for the OS/2 system editor.

The install is unattended.

Installation Directory: FindBootDrive() || ':\os2'
hobbes.nmsu.edu

This command sets the computer to NOT archive the desktop at system boot. There is a companion command, archiveON, that sets the computer to archive the desktop a system boot.

Installation Directory:

This command sets the computer to archive the desktop at system boot. There is a companion command, archiveOff, that sets the computer to NOT archive the desktop a system boot.

Installation Directory:

The Association Editor, written by Henk Kelder, is a PM program that can display and edit the associations between objects and programs.

Installation Directory: appsDir || '\AssoED'

This command installs an Audio Driver included in Suntan Special

The global variable, AudioDriver, can be set to User to indicate a manual installation or to None to skip installing an audio driver.

Installation Directory:

This command installs C-Media 8738 Audio Driver

It is safe to take all of the default values suggested by the install program. A reboot is needed after the install completes.

To uninstall this driver, run this command, but specify zero (0) devices to install.

Installation Directory:

This command installs the sound card driver for the Crystalizer ISA audio card.

It is safe to take all of the default values suggested by the install program. A reboot is needed after the install completes.

Procedure
The IBM Multimedia Presentation Manager/2 window is open.
Press Install
Allow it to change Config.Sys
Specify the number of Audio Devices in your system. It is likely
that the default value of 1 is correct.
Specify the number of Midi Devices in your system. The default is
likely to be correct.
Press OK to dismiss the dialog.
Let Suntan Special reboot the computer.

Installation Directory: FindBootDrive() || ':\MMOS2'
www.crystal.com

This command installs the sound card driver for the ESS Solo PCI audio card.

It is safe to take all of the default values suggested by the install program. A reboot is needed after the install completes.

Procedure
The IBM Multimedia Presentation Manager/2 window is open.
Press Install
Allow it to change Config.Sys
Specify the number of Audio Devices in your system. It is likely
that the default value of 1 is correct.
Specify the number of Midi Devices in your system. The default is
likely to be correct.
Press OK to dismiss the dialog.
Let Suntan Special reboot the computer.

Installation Directory:

This command installs the driver for Thinkpad audio

Installation Directory:

This command installs the SoundMax Integrated Digital Audio MMPM/2 driver. The install is unattended. This driver is for the Thinkpad T30 and higher.

Installation Directory: FindBootDrive() || ':\MMOS2'

This command installs the UniAud 1.09 Audio Driver (with a later fix by vladest; works on rambopeep)

Procedure
The IBM Multimedia Presentation Manager/2 window is open.
Press Install
Allow it to change Config.Sys
Specify the number of Audio Devices in your system. It is likely
that the default value of 1 is correct.
Specify the number of Midi Devices in your system. The default is
likely to be correct.
Press OK to dismiss the dialog.
Let Suntan Special reboot the computer.

Installation Directory: FindBootDrive() || ':\MMOS2'

This command installs the UniAud 1.14 Audio Driver

Procedure
The IBM Multimedia Presentation Manager/2 window is open.
Press Install
Allow it to change Config.Sys
Specify the number of Audio Devices in your system. It is likely
that the default value of 1 is correct.
Specify the number of Midi Devices in your system. The default is
likely to be correct.
Press OK to dismiss the dialog.
Let Suntan Special reboot the computer.

Installation Directory: FindBootDrive() || ':\MMOS2'

This command installs the UniAud 1.14 rc2 Audio Driver

Procedure
The IBM Multimedia Presentation Manager/2 window is open.
Press Install
Allow it to change Config.Sys
Specify the number of Audio Devices in your system. It is likely
that the default value of 1 is correct.
Specify the number of Midi Devices in your system. The default is
likely to be correct.
Press OK to dismiss the dialog.
Let Suntan Special reboot the computer.

Installation Directory: FindBootDrive() || ':\MMOS2'

This command installs the UniAud latest Audio Driver

Procedure
The IBM Multimedia Presentation Manager/2 window is open.
Press Install
Allow it to change Config.Sys
Specify the number of Audio Devices in your system. It is likely
that the default value of 1 is correct.
Specify the number of Midi Devices in your system. The default is
likely to be correct.
Press OK to dismiss the dialog.
Let Suntan Special reboot the computer.

Installation Directory: FindBootDrive() || ':\MMOS2'

This command creates an automatic LAN login object in the startup folder. After creating the object, the designated user will be logged in each time the system is started.

The login window will be preloaded with the user specified in the settings 'username', 'password' and 'domain'

Installation Directory:

This command installs Back Again/2000 Workstation. The product has been abandoned, and a copy of it is here in case you are a registered user with a product key.

The Config.Sys is modified, so a reboot is required after the installation is complete.

Installation Directory: appsDir || '\ba2000'
hobbes.nmsu.edu

This command lists all the bookmark files for Netscape, Mozilla, and Firefox. The user selects the bookmark file to backup.

Installation Directory:

This command installs the Bi-Directional Parallel Port Driver.

Installation Directory: FindBootDrive() || ':\os2\boot'

This command lists all the bookmark files for Netscape, Mozilla, and Firefox. The user selects the bookmark file(s) to restore.

Installation Directory:

This command installs bootAble 4.5.2, a program for creating bootable CD-ROM and DVD under OS/2 and eCS by Hayo Baan. The supporting files are also installed. A script, bootable.bg, with the paths needed for the supporting files, is created.

Invoke bootAble for the first time using "bootable bootable.bg"

Installation Directory: appsDir || '\bootAble'
www.xs4all.nl

This command installs BV, a DOS program

This command was contributed by Bart Bremmers. This install is manual. (to do: modify autoexec.bat automatically)

Installation Directory: appsDir || '\BV'

This command installs bzip2. Bzip2 is a compress/decompress program. The executable is copied to the utils directory, so no reboot is needed to use bzip2. This program, bzip2, the associated library libbzip2 (libbz2 on OS/2), and all documentation, are copyright ¸ 1996-2005 Julian Seward. All rights reserved.

The install is unattended.

Installation Directory: appsDir || '\bzip2'
www.smedley.info

This command installs Cameraderie v1.5, a digital camera application written by R. L. Walsh. Cameraderie v1.5 requires libc061.dll from netlabs.

This install is unattended.

Installation Directory: appsDir || '\camera15'

This command cleans the Suntan Special settings, adding any missing settings, and removing any extra settings.

The install is unattended.

Installation Directory:

This command installs the 32-bit Command Interpreter written by Jonathan de Boyne Pollard. The 32-bit Unicode Console API is a prerequisite, and is installed also. The OS/2 Command Line Utilities are also installed, as the command interpreter would be crippled without them.

The install is unattended. The command creates a program folder.

Installation Directory: appsDir || '\JdBP'
homepages.tesco.net

Deletes all fixpak archives and log files. This eliminates the possibility to revert fixpaks, but it saves space.

Installation Directory:

This command installs ConfigApps, an internet configuration program by Aaron Lawrence.

This install is unattended, and it creates a program object.

Installation Directory: appsDir || '\ConfigApps'
hobbes.nmsu.edu

This command installs ConfigTool 1.30, a config.sys tool. Config Tool can edit the config.sys, and for each line, displays the documentation for that line from its database. After installation, the 2003-08-31 update is applied.

The install is unattended.

Installation Directory: appsDir || "\ConfigTool"
www.os2world.com

This command installs Daniela Engert's ATAPI driver, version 0.4.0. The command recognizes that the driver is sometimes installed as DANIATAP.FLT but installs as DaniATAPI.FLT. The command removes IBMATAPI.FLT, IBMIDECD.FLT and RSJIDECD.FLT from the Config.Sys file.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

Installation Directory: FindBootDrive() || ':\os2\boot'
hobbes.nmsu.edu

This command installs Daniela Engert's EIDE driver. (DaniS506.ADD)

Version 1.8.1

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes. Reference to IBMS506.ADD in config.sys is changed to DaniS506.ADD. Reference to PCMSSDIF.SYS is removed.

Installation Directory: FindBootDrive() || ':\os2\boot'
hobbes.nmsu.edu

This command displays the instructions for DB2 1st step.

Installation Directory:

This command installs DB2 6.1 FixPak 11. This installation is unattended. DB2 must be stopped before running this command or the fixpak will not succeed. This command can service either the personal edition or the enterprise edition.

Installation Directory: FindBootDrive() || ':\sqllib'

This command rebinds the db2 databases after applying a fixpak.

Installation Directory:

This command installs DB2 version 6.1 enterprise edition. The installation is unattended. DB2 will be installed in the root of the boot volume.

The command expects either a DB2-61 CD-ROM, or all of the files that were available for download to be unzipped to the db2-61 directory.

The files for the DB2-6.1 Enterprise Edition are not supplied on the Suntan Special CD-ROM. You must supply the CD-ROM for this item: DB2-6.1 Enterprise Edition CD-ROM

Installation Directory: FindBootDrive() || ':\sqllib'

This command installs DB2 version 6.1 personal edition. The installation is unattended. DB2 will be installed in the root of the boot volume.

The command expects either a DB2-61 CD-ROM, or all of the files that were available for download to be unzipped to the db2-61 directory.

The files for the DB2-6.1 Personal Edition are not supplied on the Suntan Special CD-ROM. You must supply the CD-ROM for this item: DB2-6.1 Personal Edition CD-ROM

Installation Directory: FindBootDrive() || ':\sqllib'

This command installs DBExpert, Runtime version

This command was contributed by Bart Bremmers. This install is manual.

Installation Directory: appsDir || '\DBExpert'

This command installs DD-UP, the dynamic dns update utility. The parameter, dyndnsHostName, can be in the settings.

The install is unattended.

Installation Directory: appsDir || '\ddup'

This command cleans up after weird install problems caused by some app installs. Each case is tested, and action is taken only if a problem is detected.

GSView icon won't move until after a reboot. WebExplorer Icon should be in the Programs folder.

This install is unattended.

Installation Directory:

This command installs DFSee. DFSee is a generic disk, partition and filesystem utility for maintenance and data-recovery. It supports partition tables (FDISK, LVM), FAT, FAT32, HPFS, NTFS, and partly JFS, EXT2/3 or REISER filesystems. DFSee is commercial software which requires a license key for continued use.

This command was contributed by Bart Bremmers. This install is automated using WarpIN.

Installation Directory: appsDir || '\DFSee'
www.dfsee.com

This command installs the DHCP server configuration file. The configuration is specific to the Blonde Guy network.

Installation Directory:

This command disables Startup.Cmd by renaming it to Startup.Not.

Installation Directory:

This command installs the July 19, 2005 update to the DMD drivers, IBM OS2DASD.DMD (version 14.104) and OS2CDROM.DMD (version 10.157)

The update in this package includes a very important update to OS2DASD.DMD that appears to resolve various traps that occur when processing removeable media. This install is unattended.

Installation Directory: FindBootDrive() || ':\os2\boot'

This command installs DragText, a WPS enhancer.

Procedure
1. The suggested directory is wrong. Enter \DragText.
2. If the install directory contains a space, choose another one.
3. When the installation completes, press Exit.

Installation Directory: appsDir || '\' || productName
www.e-vertise.com

This command installs DrawSWF, a program for freehand drawing that can export it's drawing as a Flash animation. DrawSWF requires Java 1.4 or higher.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\DrawSWF'
drawswf.sourceforge.net

This command installs Doodle's Screen Saver version 1.7.5. The Cairo 1.2.4 run-time is installed, too.

Installation Directory: appsDir || "\dssaver"
dssaver.netlabs.org

This command installs Desktop On-Call v4.0 from the eComStation 1.0 Bonus Pak on CD #3. The product is also located on the eComStation 1.1 or eComStation 1.2 CD #2 in \bontrial\ecs\dtoc4.

Installation Directory: appsDir || '\dtoc'

This command installs the EA Browser by Henk Kelder. The EA browser is a PM program that can display and edit extended attributes.

Installation Directory: appsDir || '\EABrowse'

This command installs eAccounts, a tool for storing your passwords and keys. eAccounts is freeware by Frank Wochatz. A Blowfish encryption module is included.

The install is unattended. A program object is created.

Installation Directory: appsDir || '\eAccounts'
www.subsys.de

This command installs Herwig Bauernfeind's ea Toolbox

This install is unattended.

Installation Directory: cdglobal('utilDir')
hobbes.nmsu.edu

This command installs eCalc, a calculator written by Frank Wochatz. eCalc accepts Rexx expressions.

This install is unattended, and it creates a program object.

Installation Directory: appsDir || '\eCalc'
www.subsys.de

This command installs Embellish, an image viewing and manipulation program. Embellish development ceased in 1997, and the program has been released as freeware. The installation is unattended.

Installation Directory: appsDir || '\' || productName

This command installs the emx runtime. An icon for the emx documentation is created.

The command makes changes to config.sys to support emx.

The install is unattended. A reboot is required after the installation is complete.

Installation Directory: appsDir || '\emx'

This command installs ePDF - PostScript to PDF conversion software. This software makes a printer that outputs PDF files. The author is Frank Wochatz, a talented and active OS/2 developer.

The installation is unattended.

Installation Directory: appsDir || '\' || productName
www.subsys.de

This command installs Euler.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\EULER'
mathsrv.ku-eichstaett.de

This command installs the Fat32 installable file system by Henk Kelder. This project is now administered by NetLabs. Installation is unattended by WarpIN.

A reboot is needed to activate Fat32 support.

Installation Directory: FindBootDrive() || ':\OS2'

This command installs ffmpeg, a tool to convert video files from one format to another. ie .avi to mpg. ffmpeg has been ported by Paul Smedley.

The install is unattended. The command creates a program object. ffmpeg depends on libc061.dll which is installed by the libc application.

Installation Directory: appsDir || '\ffmpeg'
www.smedley.info

This command installs ffplay, a program to play videos. The OS/2 port of ffplay is maintained by Paul Smedley.

The install is unattended. The command creates a program object. ffplay depends on libc061.dll.

Installation Directory: appsDir || '\ffplay'
www.smedley.info

This command installs Ian Darwin's file(1) command. The file command displays file type. The executable is copied to the utils directory, so no reboot is needed to use file. This version of file, though old, correctly identifies OS/2 components which newer versions of file seem to have forgotten.

The install is unattended.

Installation Directory: appsDir || '\' || productName

This command installs File Commander/2. File Commander is a 32-bit text mode file manager and shell that allows you to locate, copy, move, delete, view, edit and execute your files in a quick, convenient and customizable manner. File Commander/2 is commercial software.

This command was contributed by Bart Bremmers. This install is manual.

Installation Directory: appsDir || '\FileCommander'
silk.apana.org.au

This command installs Firefox 2.0.0.6, the OS/2 open source browser.

If an old copy of Firefox is found, then it's installation directory is renamed to Firefox.old. If MOZ_PLUGIN_PATH is not defined, then pIugins are copied from the old Firefox installation to the new one. Plugin support for java and flash is installed (ipluginw.dll). A program object is created with a nice icon. If run! is installed, Firefox!.exe is created. If Mozilla Home is defined in Suntan Special settings, then it is set in config.sys. Firefox is executed once to initialize its profile and to perform automatic updates.

Installation Directory: appsDir || '\Firefox'
www.mozilla.com

This command installs the Flash version 7 plugin into the Mozilla plugins directory. The plugin will be installed in Firefox and Netscape as well.

This version of the Flash 7 plugin includes the r14 version of the dll from Macromedia, which works for youtube.com. In addition, the plugin is patched to work with LIBPATHSTRICT and reports itself as Flash 9.14 to avoid problems with version checking on some websites.

Installation Directory:
www.innotek.de

This command installs the Flash version 7 plugin into the Mozilla plugins directory. The plugin will be installed inFirefox and Netscape as well.

This version of the Flash 7 plugin includes the r68 version of the dll from Macromedia, which does not work for youtube.com.

Installation Directory:
www.innotek.de

This command installs FlashBlock into Mozilla, Firefox, PmW-Fx and SeaMonkey web browsers. FlashBlock replaces each flash animation on a web page with a button. If you wish to see the flash animation, then press the button.

Installation Directory:
flashblock.mozdev.org

This command installs File Manager/2 3.7.0 by Mark Kimes. FM/2 is a file manager. FM/2 is currently maintained by Steven H. Levine and Gregg Young.

Installation Directory: appsDir || '\FM2'
groups.yahoo.com

This command installs the Innotek Font Engine, release 1 The installation is unattended.

Installation Directory: appsDir || '\FontEngine'
www.innotek.de

FotoGet/2 is a utility to ease the transfer of pictures (and movies) between a digital camera and your OS/2 (eCS) PC. FotoGet/2 supports cameras with a USB Mass Storage interface.

Installation Directory: appsDir || '\FotoGet'
members.aon.at

This command applies two updates beyond IBM's final fixpak, XR_M005. First, the PMMERGE.DLL is backleveled to that for XR_M004. Second, Object Rexx is backleveled to the level of XR_M002.

Locked files are updated in place. Reboot immediately after applying this command.

Installation Directory: FindBootDrive() || ':\os2\dll'

This command installs FTP Server. FTP Server is written by Peter Moylan. FTP Server is shareware.

The global varaible ftpdrc can be set in settings to the location of your FTPD.INI file from a previous installation of FTP Server.

It is save to take all of the default values suggested by the install program.

Installation Directory: appsDir || '\FtpServer'
www.pmoylan.org

This command installs the Generalized Bitmap Module (GBM) by Heiko Nitzsche. Installation is unattended by WarpIN.

Installation Directory: appsDir || '\gbm'
heikon.home.tlink.de

GetMyIP prints the current IP on the screen. This is useful because it prints the external IP of a computer using NAT for its internet connection.

The command file is copied to the utils directory.

Installation Directory:
www.warp-ecs-owl.de

This command installs GhostScript and GSView using the installer that comes with GSView. GhostScript is version 8.56. GSView is version 4.8.

The installation is manual, and the suggested directory needs to be changed by the user.

Installation Directory: appsDir || '\' || productName
www.cs.wisc.edu

This command installs GPhoto2/2, a command line utility which provides support for digital cameras. If USB is found on the computer, an updated version of the USB resource manager is installed.

The install is unattended.

Installation Directory: appsDir || '\gphoto'

This command installs Hyperaccess Lite from the eComStation 1.0 Bonus Pak on CD #3. The product is located in the eComStation 1.1 and eComStation 1.2 CD #2 in \bontrial\ibmbon\os2image\fi\bonuspak\halite

The install is unattended.

Installation Directory: appsDir || '\halite'

This command installs the TCP/IP hosts file from the location specified by the setting 'hostsFile'.

The install is unattended.

Installation Directory:

This command installs HTML Tidy. HTML Tidy can check (X)HTML code for compliance with several (X)HTML standards, correct a number of errors automatically, format the code for better readability according to the user's wishes, provide hints regarding accessability, convert between codepages, and convert bad code that is commonly generated by word processors when exporting to HTML.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\HTMLTidy'
www.w3.org

This command installs IBMWorks from the eComStation 1.0 Bonus Pak on CD #3 in \eCS\bonuspak\TVoice\Wiseprog\AppContents\IBMWorks.zip or from the eComStation 1.1 or eComStation 1.2 CD #2 in \bontrial\ibmbon\os2image\fi\bonuspak\ibmworks.

The install is unattended.

Installation Directory: appsDir || '\ibmworks'

This command installs the Icon Tool by Henk Kelder. The Icon Tool is a PM program that can assign icons to objects. Icon Tool can also see hidden objects and delete undeletable objects. This is version 1.92

Installation Directory: appsDir || '\IconTool'

This command installs Injoy Dialer version 1.4. This software is protected by a key (without the key it works for 30 days) The location of the key file can be specified by the global variable injoydialerkey.

The install is unattended.

Installation Directory: appsDir || '\dialer'
www.fx.dk

This command installs InJoy Firewall, version 3.0. If a key name and key code are specified, they are applied and the program will be registered after a reboot. Otherwise the software will operate in a 30-day evaluation.

A reboot is required after the installation is complete.

Installation Directory: appsDir || '\ijfw'
www.fx.dk

This command registers InJoy Firewall, version 3.0. If a key name and key code are specified, they are applied and the program is registered. Otherwise the software will operate in a 30-day evaluation.

Installation Directory: appsDir || '\ijfw'
www.fx.dk

This command installs ImageMagick. ImageMagick is a picture manuiplation program. ImageMagick was ported by Paul Smedley.

The install is unattended.

Installation Directory: appsDir || '\' || productName
www.smedley.info

This command copies the Inetver output to the log

Installation Directory:

This command installs the InfoZip tools for creating and accessing zip files. The program creates icons for the documentation files. Unzip is version 5.52 with unshrink support added, the LZW patents have expired. The Zip version is version 2.31 compiled with emx. GNU zip (gzip) is also installed.

Installation Directory: appsDir || '\InfoZip'
www.info-zip.org

This command installs IniServe. IniServe is an OS/2 ini file server written by Peter Moylan. IniServe is freeware.

INIServe implements a client-server approach to INI file editing. Thus, in principle it can be used for remote configuration of any application whose configuration parameters are kept in an OS/2 INI file.

Installation Directory: appsDir || '\' || productName
www.pmoylan.org

This command installs INI tools v1.1 - (by Goran Ivankovic) IniEdit 1.20 is also installed.

The install is manual. The installation directory has been preset, so it is safe to take all the default values.

Installation Directory: appsDir || '\IniTools'
www.os2world.com

This command installs the Innotek Runtime, 1.12 The installation is unattended.

Installation Directory: appsDir || '\innort'
www.innotek.de

This command installs InProTrack, by Kai Evers, a tool for displaying the level of the installed software on an OS/2 system.

The install is unattended. A program object is created.

Installation Directory: appsDir || '\InProTrack'
www.s.netic.de

The Internet Application Integration (IAI) utility is designed to coordinate your web browser, email clinet and other internet applications. IAI is by Charles H. McKinnis.

Installation Directory: appsDir || '\InternetAI'
7cities.net

This command sets up IPForwarding, which is needed to run InJoy Firewall. Either a reboot or rerunning setup.cmd is needed to activate IP Forwarding.

The install is unattended.

Installation Directory: FindBootDrive() || ':\mptn\bin'

This command applies OS/2 Warp Server for e-business FixPak ip_8608. This FixPak applies to Warp Server for e-business.

FixPak ip_8608 is applied using an unattended install method. A reboot is required after applying the FixPak.

Installation Directory:

This command creates a command file to access the IBM Java 2 JRE from the command line. The name of the command is J2RE. Only works with Java 1.3.0 and Java 1.3.1.

Installation Directory:

This command installs JAlbum 6.4. JAlbum is a software package that creates photo albums to be viewed by a web browser.

The command creates program objects for running under GoldenCode Java 1.4.1 and Innotek Java 1.4.2. The browser will be Firefox!.exe as installed by Suntan Special.

Installation Directory: appsDir || '\' || productName
jalbum.net

This command configures Java 1.1 to use the Microsoft Web Fonts. The font properties are modified. A backup file is created in the \java11\lib directory named font.original.prp.

Installation Directory:

This command configures the Java plugin for Netscape, Mozilla, PmW-Fx and Firefox. The user selects the Java to be used for each browser.

Installation Directory:

This command performs an unattended installation of the IBM Java Developers Kit version 1.3.1. Both the Runtime and the Toolkit are installed.

The files for the Java JDK 1.3.1 are not supplied on the Suntan Special CD-ROM. You must supply this item: javainrt10.exe;javaintk10.exe;javainws.exe;javacomm.zip

Installation Directory: FindBootDrive() || ':\java131'

This command performs an unattended installation of the GoldenCode Java Developers Kit version 1.4.1. A license file, license.jvm, is required to run this product. The license is available from Golden Code Development.

Procedure
The license file must be supplied at installation time. If
a license file is not supplied, the installation will stop.
The installation will create Java Web Start and configure
it to run Golden Code Java.

The files for the GoldenCode Java SDK 1.4.1 are not supplied on the Suntan Special CD-ROM. You must supply this item: license.jvm

Installation Directory: appsDir || '\java141'
www.goldencode.com

This command installs InnoTek OS/2 Kit for Java, JRE version. Due to the Innotek license, you must download this product yourself. Suntan Special will install and configure the product once you have downloaded it.

The setting java2Home sets the Java 2 home directory.

The files for the InnoTek OS/2 Kit for Java (JRE) are not supplied on the Suntan Special CD-ROM. You must supply this item: install.exe

Installation Directory: appsDir || '\java142'
www.innotek.de

This command patches the Java JDK 1.1.8. The version of Java before and after the installation is displayed.

Procedure
Before the JDK 1.1.8 can be patched, all java programs must be stopped.
examples: dhcpscps.cmd, ddnsaps.cmd, binlscps.cmd
Press OK when done.

Installation Directory: FindBootDrive() || ':\'

This command installs the February 1, 2006 update to the JFS file system support (version 14.105)

Installation Directory: FindBootDrive() || ':\os2\boot'

This command installs the Jimi Pro Classes. These classes, distributed by Sun Microsystems allow the creation of graphics files in Java programs

The install is unattended. The JimiProClasses are added to the system classpath, so a reboot is needed.

Installation Directory: appsDir || '\java'

This command installs JRescuer by Pavel Shtemenko. JRescuer is a JFS undelete and recovery program for OS/2. The command installs JRescuer and creates a program object for it. The install is unattended.

This software is try before you buy. You can buy from Mensys for $29.00 US.

Installation Directory: appsDir || '\JRescuer'
en.ecomstation.ru

This command updates the timezone code for IBM Java 1.3.1 to reflect 2007 changes to Daylight Saving Time.

Installation Directory:
www.ecomstation.com

NVU and KompoZer are WYSIWYG webpage editors based on Mozilla technology. First, Daniel Glazman developed NVU for Linspire. NVU is not being developed any longer and it will take a while until being replaced with a new webpage composer. That is why recently Kaze has created the KompoZer project, that fixes lots of bugs in NVU. An OS/2 version by Peter Weilbacher.

Installation Directory: appsDir || '\kompozer'
weilbacher.org

This command installs krypto to the utility directory. Krypto provides strong file encryption using the Frog cipher. Krypto was ported by Daniel de Kok.

The install is unattended.

Installation Directory:
krypto.netlabs.org

This command installs LBMix. LBMix was written by Lesha Bogdanow. PipeMix by the same author is also installed.

The installation is unattended.

Installation Directory: appsDir || '\lbmix'
users.podolsk.ru

This command installs Lotus Domino Go Webserver. The installation is unattended. To install from a local copy, copy the ldgw directory from the CD-ROM to this directory.

The files for the Lotus Domino Go Webserver for OS/2 Warp are not supplied on the Suntan Special CD-ROM. You must supply the CD-ROM for this item: OS/2 WSeB Application Servers

Installation Directory: FindBootDrive() || ':\www'

This command installs the LED Panel Font, which was created by Herwig Bauernfeind. The command is automated.

Installation Directory:

This command installs Innotek LibC 0.5.1, a prerequisite for Mozilla 1.5 and above on OS/2. Innotek LibC 0.6.3 is also installed. The installation is unattended.

If WarpIN is available, LibC 0.6.3 will be registered in the WarpIN database.

Installation Directory: FindBootDrive() || ':\os2\dll'

This command installs LimeWire 4.12.6. LimeWire is a software package which enables individuals to search for and share computer files with anyone else on the internet.

The command creates a program objects for running under GoldenCode Java 1.4.1 and Innotek Java 1.4.2.

Installation Directory: appsDir || '\' || productName
www.limewire.com

This command installs both loaddskf and savedskf in the utility directory.

The installation is unattended.

Installation Directory: cdglobal('utilDir')

This command installs Lotus SmartSuite version 1.7.

The installation is unattended. The installation has about 100 modifications which install the full SmartSuite, instead of just the commonly used parts.

After the IBM installer completes, this command makes a change to config.sys to prevent the system from being hosed.

The files for the Lotus SmartSuite 1.7 are not supplied on the Suntan Special CD-ROM. You must supply this item: Lotus-SS1_7.zip;install.exe

Installation Directory: appsDir || '\LotusW4'

This command upgrades Lotus SmartSuite from version 1.7 to version 1.73.

The installation is unattended. The installation has about 100 modifications which install the full SmartSuite, instead of just the commonly used parts.

The files for the Lotus SmartSuite 1.7.3 are not supplied on the Suntan Special CD-ROM. You must supply this item: C59A0IE.EXE

Installation Directory: appsDir || '\LotusW4'

This command installs patches to Lotus SmartSuite version 1.73 including IBM Lotus SmartSuite for OS/2 Warp 4 Release 1.7 Fixpack 3 Patch Release #1 - January, 2006 and OS/2 Warp 4 Release 1.7 Fixpack 3 Patch Release #2 - July, 2006 and OS/2 Warp 4 Release 1.7 Fixpack 3 Patch Release #3 - July, 2007.

The installation is unattended.

Installation Directory: appsDir || '\LotusW4'

This command opens a LAN server administration window. Use the window to create all the user accounts needed on the LAN.

Installation Directory:

Lucide 1.20 by Serenity Systems. Installs English version. If you have a support agreement for eComStation, you may download the installation files from Mensys.

Lucide has prerequisites of UConv and LibC.

The files for the Lucide 1.20 are not supplied on the Suntan Special CD-ROM. You must supply this item: lucide-1_20.WPI

Installation Directory: appsDir || '\lucide'
www.ecomstation.com

This command applies the August 12, 2004 LVM update. This patch applies to MCP, WSeB, ACP and eCS.

The LVM update is applied using an unattended install method. A reboot is required after applying this patch.

Installation Directory: FindBootDrive() || ":"

This command installs mbmon The FastioA driver is also installed.

Beta 1

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

Installation Directory: appsDir || '\mbmon2'

This command installs System Resources, also known as MemSize, a system monitor tool by Rich Papo. System Resources is abandonware.

The install is unattended, but then System Resources starts and needs to know the directory for its ini file. The default is a safe response. The command creates a program object.

Installation Directory: appsDir || '\MemSize'

This command installs the Mesa2 spreadsheet. Mesa2 is commercial software which may be purchased. A product Key is required for ongoing use.

This command was contributed by Bart Bremmers. This install is manual.

Installation Directory: appsDir || '\Mesa2'
www.sundialsystems.com

This command installs MMIOMP3 by Russell O'Connor.

It is safe to take all the defaults suggested by the installer.

A reboot is required after the installation is complete.

Procedure
The IBM Multimedia Presentation Manager/2 window is open.
Press Install
Allow it to change Config.Sys
Press OK to dismiss the dialog.

Installation Directory: FindBootDrive() || ':\mmos2'
r6.ca

This command installs MoneyDance 2007, a financial management package. MoneyDance requires Java 1.3.1 or higher.

The install is unattended. The command creates a program object. If Java 1.4.1 is available, then that is used, else Java 1.3.1, else Java 1.4.2.

Installation Directory: appsDir || '\moneydance'
www.moneydance.com

This command installs a Mouse Driver included in Suntan Special

User - Install your own driver None - skip installation

Installation Directory:

This command installs Amouse, a mouse driver written by noller & breining software of Weissach, Germany. Amouse has been released as freeware. The installation is almost unattended.

Installation Directory: appsDir || '\' || productName

This command installs the IBM scrolling mouse driver. This command is only useful for Warp 4, as newer versions of OS/2 already have the scrolling mouse driver

The install is unattended.

Installation Directory:

This command installs SingleMouse, the IBM mouse driver. The installation is unattended.

Installation Directory: appsDir || '\smouse'

This command installs Mozilla 1.7.13, the OS/2 open source browser.

If an old copy of Mozilla is found, then it's installation directory is renamed to Mozilla.old. If MOZ_PLUGIN_PATH is not defined, then pIugins are copied from the old Mozilla installation to the new one. If no previous Mozilla, then plug-ins are copied from Netscape. Plugin support for java and flash is installed (ipluginw.dll). A program object is created with a nice icon. If run! is installed, Mozilla!.exe is created. If Mozilla Home is defined in Suntan Special settings, then it is set in config.sys.

Installation Directory: appsDir || '\Mozilla'
www.mozilla.org

This command runs Mozilla Profile Manager.

Installation Directory:

This command installs Mr Message. Mr Message is an AIM/ICQ client program written my Marty Amodeo.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\MrMessage'
mamodeo.dyndns.org

This command installs the ISO plugin for NetDrive for OS/2. The install is unattended. The install fails if NetDrive is not found.

Installation Directory:
www.blueprintsoftware.com

This command installs the SMB plugin for NetDrive for OS/2. The install is unattended. The install fails if NetDrive is not found.

Installation Directory:
samba.netlabs.org

This command installs NetDrive for OS/2. The system must be rebooted before installing plugins.

Installation Directory: appsDir || '\ndfs'
www.blueprintsoftwareworks.com

This command installs Netscape 4.61 and the improved icons.

The install of Netscape is unattended. After the installation completes, a reboot is needed.

Procedure
Netscape will install automatically.

Installation Directory: appsDir || '\Netscape'

This command installs Aaron Lawrence's NewView, an enhanced help viewer.

Installation Directory:
hobbes.nmsu.edu

This command installs NightVision, a "planetarium" program for OS/2 written by Brian Simpson.

Installation Directory: appsDir || '\' || productName
home.att.net

This command installs NISTime, by Pieter Bras. NISTIME is a TCP/IP application which queries NIST Internet time servers using the SNTP (RFC 2030) or Daytime (RFC 867) services and optionally adjusts the OS/2 system clock..

Installation Directory: appsDir || '\NISTime'

This command installs Norman Virus Control version 5.80, an anti- virus tool. Norman Virus Control is commercial software. A registration key is required.

In addition to installing NVC, this command installs the user guides which are available from the Norman website.

Installation Directory: appsDir || "\Norman"
www.norman.com

This command opens NVC configuration. While Suntan Special is running, the NVC on-access scanner must be disabled.

Installation Directory:

This command installs nvu 1.00, the OS/2 open source web page editor.

Installation Directory: appsDir || '\nvu'

This command installs Odin. Odin provides support for Win32 programs under OS/2 and eComStation. The installation is automated using WarpIN.

The Odin version is April 2, 2005

Installation Directory: appsDir || '\Odin'
odin.netlabs.org

This command installs Odin App. Odin App tests the Odin installation and adds some useful files.

Installation Directory: appsDir || '\OdinApp'
odin.netlabs.org

This command installs oo, a command line utility to manipulate Workplace Shell Objects, to the utilities directory. oo is written by Rich Walsh.

Installation Directory: cdglobal('utilDir')

This command installs the Open Office 1.1.4. The installation is manual. When the installation is complete, a security patch is made. Suntan Special will attempt to register Open Office if the user provides a key.

To Do set the menu fonts to the system font

Installation Directory: appsDir || '\OpenOffice114'
www.innotek.de

This command installs the Open Office 1.1.5. The installation is manual. When the installation is complete, a security patch is made. Suntan Special will attempt to register Open Office if the user provides a key.

The files for the OpenOffice.org 1.1.5 are not supplied on the Suntan Special CD-ROM. You must supply this item: ooo115en.zip

Installation Directory: appsDir || '\OpenOffice115'
www.innotek.de

OpenOffice.org 2.04 by Serenity Systems. Installs the English version. If you have a support agreement for OpenOffice.org, you may download the installation files from Mensys.

The files for the OpenOffice.org 2.04 are not supplied on the Suntan Special CD-ROM. You must supply this item: OOo204-base.WPI;OOo204-bin.WPI;OOo204-common.WPI;OOo204-en.WPI

Installation Directory: appsDir || '\OpenOffice204'
www.ecomstation.com

This command creates an icon for Object REXX Information.

The install is unattended. The command creates a program object.

Installation Directory:

This command pauses for some time (default: 60 seconds). Also signals sequence page progress bar.

Installation Directory:

This command installs PCI, a program to scan the PCI bus and report on the cards found.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\pci'

This command installs the Plug-in Pack version 3.0, which normally accompanies Netscape 4.61.

The install is unattended.

Installation Directory: appsDir || '\Mozilla'

This command installs PM Camera.

The install is unattended.

Installation Directory: appsDir || '\PMCamera'

This command installs PMFax Pro

The install is unattended.

Installation Directory: appsDir || '\pmfax'

This command installs the new PMFormat. This is experimental code. It replaces OS/2 components.

The install is unattended.

Installation Directory:

This command installs PMSheet, an image viewer.

The install is unattended. The command creates a program object and does object associations.

Installation Directory: appsDir || '\' || productName

This command installs PMView 2000, version 2.32. PMView is a versatile and fast image viewer and converter. The current version is PMView Pro, version 3.12.

PMView is a product of Peter Neilson. PMView is shareware, and is priced around $39.95

Procedure
When PMView installer asks to set file associations, press OK
When PMView asks you to register, say no, unless you want to register.
If you need to register later, re-run this command.

Installation Directory: appsDir || '\' || productName
www.pmview.com

This command installs PMVNC, an OS/2 implementation of VNC.

Virtual Network Computing (VNC) is a desktop sharing system which uses the RFB (Remote FrameBuffer) protocol to remotely control another computer. It transmits the keyboard presses and mouse clicks from one computer to another relaying the screen updates back in the other direction, over a network.

Both the Client, by Akira and the Server, by ErOS2, are installed. The client has been recompiled by Michael Greene using OpenWatcom C.

The install is unattended. The command creates program folders and icons.

Installation Directory: appsDir || '\pmvnc'
www.blondeguy.com

This command installs PmW-Fx 2.0.0.8, Peter Weilbacher's version of the Firefox open source browser.

If an old copy of PmW-Fx is found, then it's installation directory is renamed to PmW-Fx.old. If MOZ_PLUGIN_PATH is not defined, then pIugins are copied from the old PmW-Fx installation to the new one. Plugin support for java and flash is installed (ipluginw.dll). A program object is created with a nice icon. If run! is installed, PmW-Fx!.exe is created. If Mozilla Home is defined in Suntan Special settings, then it is set in config.sys. PmW-Fx is executed once to initialize its profile and to perform automatic updates.

Installation Directory: appsDir || '\PmW-Fx'
pmw-warpzilla.sourceforge.net

This command installs PMWipe.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\' || productName

This command installs the PolarBar Mailer, or, if an installation exists and is available, then an icon is created that points to the existing installation.

You may designate an existing installation by specifying a polarbarMailDir in the settings file. If no such setting exists, then a new copy of PolarBar is installed.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\PolarBar'
www.polarbar.org

This command installs Microsoft PowerPoint Viewer. This viewer is freely available on the Microsoft Website. Also included are some extra items to allow the viewer to run on OS/2

Odin is required to run PowerPoint Viewer.

Installation Directory: appsDir || '\PowerpointViewer'

This command installs one or more Printer Drivers included in Suntan Special

The global variable, PrinterDriver, can be set to User to indicate a manual installation or to None to skip installing an printer driver. Multiple printer drivers may be installed -- separate the driver names with a semicolon.

The Printers folder and a folder containing printer models will be opened. Drag the icon for your printer to the printers folder to create your printer.

Procedure
The printers folder is opened.
Drag the Network Printer template to an empty space of the printers
folder to create a new network printer.
Select the network, server and resource for the printer.
A dialog will appear with the name of your printer. Press Install.
Enter the name directory containing your printer driver.
Press the Refresh button
Select your printer model. Press Install.
When the installation completes, press OK.
Press Cancel to close the Install New Printer Driver window
Press OK to close the Suntan Special dialog.

Installation Directory:

This command installs the eCS Laserjet printer driver. This is really the latest IBM driver, only available under Passport Advantage or to eCS subscribers.

The files for the eCS Laserjet printer driver are not supplied on the Suntan Special CD-ROM. You must supply this item: lj30827en.zip

Installation Directory:

This command installs the eCS omni printer driver. This is really the latest IBM driver, only available under Passport Advantage or to eCS subscribers.

The files for the eCS omni printer driver are not supplied on the Suntan Special CD-ROM. You must supply this item: om30827en.zip

Installation Directory:

This command installs the eCS plotters printer driver. This is really the latest IBM driver, only available under Passport Advantage or to eCS subscribers.

The files for the eCS plotters printer driver are not supplied on the Suntan Special CD-ROM. You must supply this item: pl30827en.zip

Installation Directory:

This command installs the eCS pscript printer driver. This is really the latest IBM driver, only available under Passport Advantage or to eCS subscribers.

The files for the eCS pscript printer driver are not supplied on the Suntan Special CD-ROM. You must supply this item: ps30827en.zip

Installation Directory:

This command installs the Epson 740 printer driver.

Installation Directory:

This command installs the Epson C60 printer driver.

Installation Directory:

This command installs the IBM Laserjet printer driver.

Installation Directory:

This command installs the IBM omni printer driver.

Installation Directory:

This command installs the IBM plotters printer driver.

Installation Directory:

This command installs the IBM pscript printer driver.

Installation Directory:

This command installs ProNews v1.59, a usenet client. ProNews used to be shareware, but is now maintained as donationware.

The installation is attended, and you're advised to change the installation directory from it's default in the root of the C: drive.

Installation Directory: appsDir || '\' || productName

This command installs PTPro 1.10. PTPro is a camera support program. PTPro was ported by Rich Walsh.

PTPro is a command-line program for retrieving pictures & information from your PTP (Picture Transfer Protocol) based digital camera.

With PTPro, you can rename & renumber your photos and thumbnails as you save them, view extended info about your pictures (e.g. size in pixels), and of course, erase them. PTPro can also show you info about your camera: the formats it uses, its storage capacity, etc.

The install is unattended.

Installation Directory: appsDir || '\' || productName

This command installs RAMFS, a RAM disk implemented as an installable file system. RAMFS was originally written by Karl Olsen and is currently maintained by Andrew Belov.

The install is unattended. A reboot is required after installation.

Installation Directory: appsDir || '\ramfs'

This command reboots the computer. If the turbo mode is 0, message is displayed before rebooting.

Installation Directory:

This command creates an icon for the OS/2 registry editor.

The install is unattended. The command creates a program object.

Installation Directory:

This command performs registration on a number of applications which are installed by Suntan Special.

Installation Directory:

This command installs the resolv2 file, which provide name resolution for TCP/IP. The resolv2 file is copied from the location specified by the setting 'resolvFile'

The install is unattended.

Installation Directory:

Rexx Autostart is a workaround for timing problems that lead to a WPS hang on startup. Rexx Autostart is by Herwig Bauernfeind and Charles H. McKinnis.

Installation Directory: appsDir || '\RexxAutostart'
7cities.net

This command removes Netscape 4.61. Netscape 4.61 is automatically installed for eComStation and MCP and ACP. This version of Netscape is obsolete, so this command removes it.

The install is unattended, and a reboot is needed to complete the removal of Netscape 4.61.

Installation Directory:

This command installs RSJ CD-Writer 5.53

The installation is unattended, but the installer shows up on the screen. Don't touch it! When the installer completes, this command makes some changes to config.sys to permit the system to see the CD-RW as a normal CD-Rom.

A reboot is required after the installation is complete.

Installation Directory: appsDir || '\CDWriter'
www.rsj.de

This command installs RSJ CD-Writer 6.00

The installation is unattended, but the installer shows up on the screen. Don't touch it! When the installer completes, this command makes some changes to config.sys to permit the system to see the CD-RW as a normal CD-Rom.

A reboot is required after the installation is complete.

Installation Directory: appsDir || '\CDWriter'
www.rsj.de

This command installs Run! in the utility directory.

The install of Run! is unattended.

Installation Directory: cdglobal('utilDir')

This command runs Netscape for the first time. This causes the profile manager to be run to create the first profile. A web page with configuration changes is displayed. Configuration changes are now automatic. Exit Netscape to allow this command to make the changes.

Installation Directory: SysIni(netscapeIni, 'Netscape Navigator-' || result, 'Install Directory')

This command scans a sequence for extra files.

Installation Directory:

This command installs SeaMonkey 1.1.5, the OS/2 open source browser.

If an old copy of SeaMonkey is found, then it's installation directory is renamed to SeaMonkey.old. If MOZ_PLUGIN_PATH is not defined, then pIugins are copied from the old SeaMonkey installation to the new one. If no previous SeaMonkey, then plug-ins are copied from Mozilla. If no Mozilla, then plugins are copied from Netscape. Plugin support for java and flash is installed (ipluginw.dll). A program object is created with a nice icon. If run! is installed, SeaMonkey!.exe is created. If Mozilla Home is defined in Suntan Special settings, then it is set in config.sys.

SeaMonkey is configured to use the Innotek Font Engine for anti-aliased font display.

Installation Directory: appsDir || '\SeaMonkey'
www.mozilla.org

Automatically set my custom sounds (Make your own default sounds file based on this one)

Installation Directory:

This command opens the Volume applet.

Installation Directory:

This command installs the shorten tool.

Installation Directory: appsDir || '\shorten'

This command will shut the system. You may need to press control-alt-delete to reboot.

Installation Directory:

This command installs SketchIt, built by Michael Greene. Built with OpenWatcom 1.6, from the source code for DrawIt. This has nothing to do with Brian software's Windows sketch program.

Installation Directory: appsDir || '\SketchIt'

This command installs the SmartMon. SmartMon is a VIO program that can display and monitor hard disk status.

Installation Directory: appsDir || '\SmartMon'

This command installs sox. Sox stands for Sound eXchange and it is a universal sound sample translator. A copy of sox is placed in the utility directory. The sox manual is copied to the utility directory as well.

Complete source code is included on the Suntan Special CD-ROM, but only the binary and the manual are installed.

Installation Directory: cdglobal('utilDir')
sox.sourceforge.net

This command installs StarOffice 5.1a, an office suite by Sun Microsystems.

The install program does not suggest the correct directory for installation. The user must enter a large amount of information during the install process.

When the install program begins the install, it then asks for the directory for Java. Be careful to select the correct one, the default is usually wrong. The Java Home should indicate the current boot drive.

When this installation is complete, the StarOfficePatch application should be installed.

The files for the StarOffice 5.1a are not supplied on the Suntan Special CD-ROM. You must supply this item: staroffice51a.zip

Installation Directory: appsDir || '\Office51'

This command installs patch 109258-02 for StarOffice 5.1a.

The install is unattended.

Installation Directory:

This command installs StockMarket/2, a stock tracking program created by Dimitris 'sehh' Michelinakis.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\StockMarket'
www.michelinakis.gr

This command installs Sysbench 0.9.5 by Trevor Hemsley. Sysbench is a comprehensive benchmarking program for OS/2. The command installs Sysbench and creates a program object for it. The install is unattended.

Installation Directory: appsDir || '\SysBench'
www.os2warp.org

This command installs SystemInfo, a clone of the Norton SystemInfo for Windows originally by Alexey S. Smirnof, and continued by Yuri Prokushev. This installation is unattended.

Installation Directory: appsDir || '\SystemInfo'

This command installs Tame/2. Tame/2 provides easy scanner access. Tame/2 includes SANE, Scanner Access Now Easy. Tame/2 requires MMOS/2, REXX and emx. Tame/2 has been ported by Paul Smedley.

Installation Directory: appsDir || "\Tame"
www.smedley.info

This command installs TCPConfig by Reinhard Berger.

Installation Directory: appsDir || '\tcpconfig'

This command installs TCP/IP version 4.32. Supported systems include Warp 4 and Warp Server for e-Business. The installation is unattended.

TCP/IP 4.32 can be downloaded from Software Choice or www.ecomstation.com

A reboot is required after installing TCP/IP 4.32.

The files for the IBM TCP/IP 4.3 are not supplied on the Suntan Special CD-ROM. You must supply this item: tcpip43_eng.zip

Installation Directory:

This command cleans up after the installation of IBM TCP/IP version 4.32.

TCP/IP 4.3 can be downloaded from Software Choice or www.ecomstation.com

A reboot is required after this command.

Installation Directory:

This command opens the TCP/IP configuration for TCP/IP version 4.1 and up found in Warp Server for e-business, MCP, ACP and eComStation.

Procedure
create TCP/IP users and/or edit their settings
activate FTP and telnetd servers.
This is also the place to configure TCP/IP printing.
Press OK to close the configuration program.
Press OK to save settings.
Press Cancel to reboot later.

Installation Directory:

This command installs the TCP/IP password file from the location specified by the setting 'passwdFile'. The default name of the TCP/IP password file is TCPNBK.NBK

The install is unattended.

Installation Directory:

This command installs Thunderbird 2.0.0.5, the OS/2 open source e-mail client.

If an older Thunderbird directory is found, it will be renamed to Thunderbird.old. If Run! has been installed, it will be used to create a Thunderbird icon that can be run concurrently with the Firefox web browser.

LibC 0.5.1 (libc) must be installed to run Thunderbird.

Installation Directory: appsDir || '\Thunderbird'
www.mozilla.org

This command installs top, a program to list top cpu using programs, and cadh and ctrl-alt-del handler.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\top'
home.clara.net

This command installs Tyra/2 version 1.91, a config.sys tool. Tyra/2 is now freeware, and a registration key is included.

Installation Directory: appsDir || "\Tyra2"
www.teamos2hamburg.de

This command updates the timezone code for Innotek Java 1.4.2 to reflect 2007 changes to Daylight Saving Time.

Installation Directory:
www.ecomstation.com

UClip is designed to allow OS/2 programs to exchange unicode text using the clipboard with other native programs or with odin-ized programs. UClip is by Yuri Dario.

WarpIN is required to install uclip.

Installation Directory: appsDir || '\uclip'

This command installs the unarj tool.

Installation Directory: appsDir || '\UnArj'

This command applies the August 11, 2005 - Kernel patch. This patch applies to ACP and Warp Server for e-Business.

The Kernel patch is applied using an unattended install method. A reboot is required after applying this patch.

Installation Directory: FindBootDrive() || ":\"

This command installs UniMaint. UniMaint is an OS/2 utility to backup and restore your desktop, perform ini file maintenance, view/edit extended attributes and uninstall applications.

This command was contributed by Bart Bremmers. This install is unattended, and it creates a program object.

Installation Directory: appsDir || '\UniMaint'
www.filestar.com

This command applies TCP/IP 4.3 for OS/2 FixPak un_2334. This FixPak applies to TCP/IP 4.3x.

TCP/IP 4.3 for OS/2 FixPak un_2334 is applied using an unattended install method. A reboot is required after applying this FixPak.

Installation Directory:

This command creates the user accounts needed to install DB2 and websphere. The command is unattended.

Installation Directory:

This command installs the UPS service. The default parameters have been chosen so that if no UPS is attached, no shutdown will occur. A reboot is needed after this command completes to activate the UPS service.

The UPS service is included with WSeB and ACP. The driver is an optional part of the install. If the driver is not present, the UPS service will not be configured.

Installation Directory:

This command installs USB Basic support.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

The files for the USB Basic driver are not supplied on the Suntan Special CD-ROM. You must supply this item: usb10162.zip

Installation Directory: FindBootDrive() || ':\os2\boot'

This command installs USB Storage support.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

The files for the USB Storage driver are not supplied on the Suntan Special CD-ROM. You must supply this item: usbs10162.zip

Installation Directory: FindBootDrive() || ':\os2\boot'

This command installs USB Printer support.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

The files for the USB Printer driver are not supplied on the Suntan Special CD-ROM. You must supply this item: usbp10157.zip

Installation Directory: bootDrive || ':\os2\boot'

This command installs the USB Resource Manager, which is a utility from the great folks at OS/2 NetLabs.

This install is unattended, and config.sys is modified, so a reboot is necessary after the installation completes.

Installation Directory: appsDir || '\USBResMgr'

This command installs Blonde Guy utilities. The Config.Sys is changed to put the utilities on the path.

A reboot is needed after the installation completes.

Installation Directory:

This command installs vfat2ea, a command line program for converting VFAT longnames to extended attributes and back. vfat2ea was written by Doodle.

The install of vfat2ea is unattended.

Installation Directory: cdglobal('utilDir')

This command installs a Video Driver included in Suntan Special

User - Install your own driver None - skip installation

Installation Directory:

This command installs IBM GRADD.

Installation Directory:

This command installs SciTech Display Doctor Standard Edition v7.04. This version was the last version available without a subscription to Software Choice. eComStation users should use a later version.

The installation is unattended.

Installation Directory: appsDir || '\Acrobat3'

This command installs the IBM default GRADD driver. A reboot is required to enable the default GRADD driver.

Installation Directory:

This command installs the IBM default VGA driver. A reboot is required to enable the default VGA driver.

Installation Directory:

This command installs SciTech SNAP graphics.

Procedure
Use the express installation
If any dialog asks to replace a newer file, press Yes.
When the installation completes, change from reboot now to reboot later

Installation Directory:

This command installs SciTech SNAP graphics version 3. The installation is unattended.

Installation Directory:
www.scitechsoft.com

This command installs Connectix Virtual PC for OS/2.

The virtual switch from version 5.1 is flawed. It causes OS/2 to trap under heavy load. The one from version 5.0 is better, and it is installed instead. The one from version 5.1 is kept as .\vswitch\switch.bak.

The files for the Connectix Virtual PC are not supplied on the Suntan Special CD-ROM. You must supply this item: install.exe

Installation Directory: appsDir || '\VirtualPC'
www.innotek.de

This command installs WOL_OS2, a command line program to send Wake-On-LAN messages over a TCP/IP connection. This program appears to be abandoned. The web page is no longer there, and a Google-cached version is supplied for information.

Installation Directory: appsDir || '\wol_os2'

This command installs WarpIN version 1.0.15. WarpIN is the new OS/2 installer originally written by Ulrich Moeller and now maintained by Paul Ratcliffe. Initial installation is interactive, but upgrades are unattended.

Installation Directory: appsDir || '\WarpIN'
warpin.netlabs.org

This command installs and/or uninstalls WarpOverlay, by Valery Gaynullin.

WarpOverlay is free software.

Installation Directory: FindBootDrive() || ':\os2\dll'
os2.kiev.ua

This command installs WarpVision

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\WarpVision'
os2.kiev.ua

This command installs WarpZip, version 3.9. WarpZip is a program to examine, create and modify compressed archives. WarpZip is shareware, and is priced around $30.00 WarpZip is written by Wayne Swenson, and produced by PillarSoft.

Procedure
The install is manual, but it is safe to take all the defaults.

Installation Directory: appsDir || '\' || productName
www.pillarsoft.net

This command installs wavecut.

Installation Directory: appsDir || '\wavecut'
www.subsys.de

This command installs Weasel. Weasel is a mail server writting by Peter Moylan. Weasel is shareware.

It is save to take all of the default values suggested by the install program.

Installation Directory: appsDir || '\' || productName
www.pmoylan.org

This command installs Webalizer. The command also creates icons to report on the current web server logs, and also for the archive of old web server logs.

Installation Directory: appsDir || '\webalizer'
www.mrunix.net

This command installs the Core Web Fonts, and Alex Taylor's warp sans font. This command will install all TTF files in the setup directory.

The command is automated. A reboot is necessary before using the fonts.

Installation Directory:
corefonts.sourceforge.net

This command installs WGet. A copy of WGet is placed in the utilities directory. An Icon for the WGet manual is created.

Installation Directory: appsDir || '\' || productName

This command installs the whois 4.6.6, a port of Marco d'Itri's great WHOIS tool by Paul Hartman .

The install is unattended.

Installation Directory: cdglobal('utilDir')

This command installs WPTools by Henk Kelder. WPTools is now abandonware. It was a collection of programs to manipulate the workplace shell. A WPTools folder with program objects for the WPTools programs is created.

Two command line programs, defassoc.exe and getobj.exe, are copied to the utility directory. Defassoc manipulates associations, and getobj displays the properties of an object.

Installation Directory: appsDir || '\WPTools'

This command opens the System properties. If XWorkplace or eWorkplace is installed, it opens the Screen properties.

Installation Directory:

This command opens the WarpCenter properties. I like to change the icons to Large, and turn off all monitors except the CPU monitor.

Installation Directory:

This command applies IBM MPTS FixPak wr_8708. This FixPak applies to TCP/IP 4.3x.

IBM MPTS Lan Adapter and Protocol Support FixPak wr_8708 is applied using an unattended install method. A reboot is required after applying this FixPak.

Installation Directory:

This command configures WebSphere for the Blonde Guy website. The command file may be useful to others who wish to use WebSphere on OS/2.

The installation is manual, follow the directions for operating the WebSphere admin tool.

Installation Directory:

This command tests the Blonde Guy servlets into WebSphere.

Wait for Netscape to start, then follow the directions for each web page. Fixing any problems is totally a manual process.

Installation Directory:

This command installs the Blonde Guy servlets into WebSphere.

The installation is unattended, except for adding a user to DB2, which uses the DB2 Control Center.

Installation Directory:

This command installs WebSphere version 3.02. It is safe to take all of the suggestions that the installer makes. After the IBM installer completes, this command creates a better command file for starting WebSphere. A reboot is required after the installation is complete.

The files for the Websphere 3.02 Standard Edition are not supplied on the Suntan Special CD-ROM. You must supply the CD-ROM for this item: Internet Tools for OS/2

Installation Directory: FindBootDrive() || ':\Websphere'

This command applies the February 7, 2005 - Warp Convenience Pack FixPak XR_C005.

The FixPak is applied using an unattended install method. A reboot is required after applying the FixPak.

Installation Directory:

This command applies the 8-16-2002 - Warp FixPak XR_D003, known as Device Driver Fixpak 3. This FixPak applies to Warp 3, Warp 4 and Warp Server for e-Business.

Device Driver FixPak 3 is applied using an unattended install method. A reboot is required after applying the FixPak.

Installation Directory:

This command installs XTide, a package that provides tide and current predictions in a wide variety of formats. Thanks to Dale DePriest for this port which requires emx.

The install is unattended. The command creates a program object.

Installation Directory: appsDir || '\tide'
www.flaterco.com

This command installs X-Workplace 1.0.7, a workplace shell extender written by Ulrich Moeller and maintained by Paul Ratcliffe.

Installation Directory: appsDir || '\XWorkplace'
www.xworkplace.org

This command configures XWorkplace.

Installation Directory:

This command installs z!, a MP3 player by Dink Ogg Vorbis support is also installed. A desktop icon is created.

Installation Directory: appsDir || "\Z"
www.dink.org